The properties of silicon alloyed ferritic ductile ironsReport as inadecuate




The properties of silicon alloyed ferritic ductile irons - Download this document for free, or read online. Document in PDF available to download.

Metallurgy, Vol.55 No.3 July 2016. -

In this paper the influence of silicon content of 3,1 to 5,4 wt. % on the tensile properties, hardness and impact energy of ferritic ductile iron was analysed. It was found that silicon strengthens the ferrite, resulting in an increase in yield strength and tensile strength with increasing silicon content up to 4,22 wt. %. Elongation and impact energy decreases and the hardness increases with increasing silicon content. Since ferritic ductile irons alloyed and strengthened by silicon have a higher Rp0,2-Rm ratio and a higher elongation than conventional ferritic, ferritic-pearlitic and pearlitic ductile irons at the same level of tensile strength, we can expect an increased demand for these materials in applications where high resistance to impact load and low temperature impact properties are not required.

ductile iron; microstructure; tensile properties; impact energy; hardness



Author: Z. Glavas - ; University of Zagreb, Faculty of Metallurgy, Sisak, Croatia A. Strkalj - ; University of Zagreb, Faculty of Metallu

Source: http://hrcak.srce.hr/



DOWNLOAD PDF




Related documents