Parametric test for the preliminary design of suspension bridgesReport as inadecuate




Parametric test for the preliminary design of suspension bridges - Download this document for free, or read online. Document in PDF available to download.

International Journal of Advanced Structural Engineering

, Volume 9, Issue 2, pp 165–176

First Online: 09 May 2017Received: 28 September 2016Accepted: 29 April 2017DOI: 10.1007-s40091-017-0156-y

Cite this article as: Arruda, M.R.T. & Serafim, J.P.M. Int J Adv Struct Eng 2017 9: 165. doi:10.1007-s40091-017-0156-y

Abstract

The preliminary design of suspension bridges is a very important step in the design of a structure, since this stage is the one that will lead to an efficient and economic structure. The models that are used nowadays are complex and sometimes hard to apply, leading to a lack of comprehension from the designing team. This work proposes a new simplified method for the preliminary design of cable suspension bridges that relate the stiffness of the deck truss with the stiffness of the cable, in which stresses are calculated. This relation is intended to know how much of the live load is absorbed by each of these elements and finally obtaining the pre-design values of each substructure. First simple parametric tests are executed using the proposed method and finite element method with geometrical non-linear analysis, in order to study its accuracy. Finally, a real case study is analysed using a known Portuguese suspension bridge, in which the proposed method is applied and compared with numerical solutions.

KeywordsSuspension bridges Preliminary design Deflection theory of the suspension bridge Stiffness distribution Parametric analysis Uniform and point loads 



Author: M. R. T. Arruda - J. P. M. Serafim

Source: https://link.springer.com/



DOWNLOAD PDF




Related documents