Analysis of Rotor-to-Stator Rub in a Large Steam TurbogeneratorReport as inadecuate




Analysis of Rotor-to-Stator Rub in a Large Steam Turbogenerator - Download this document for free, or read online. Document in PDF available to download.

International Journal of Rotating Machinery - Volume 2007 2007, Article ID 90631, 8 pages

Research Article Dipartimento di Meccanica, Politecnico di Milano, Milan 20156, Italy

Received 6 June 2006; Accepted 19 December 2006

Academic Editor: K. Kawaike

Copyright © 2007 Paolo Pennacchi and Andrea Vania. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

Rotor-to-stator rub is a very common topic in rotor dynamics and several modelshave been proposed in the literature. Anyhow these models are often able to explainonly the experimental dynamical behaviour of simple test rigs, which aredeliberately reproducing a Jeffcott rotor. On the contrary case, histories related toreal machines are seldom presented and analysed. The aim of this paper is topresent an actual case history of a large turbogenerator unit that was subjected topartial arc rubs. The experimental results are shown and discussed along with themodel-based diagnostic strategy employed to identify the fault severity and thelocation of the shaft cross-sections where the heaviest rubs occurred. Comparisonsbetween experimental data and simulated vibrations caused by the identified faultare shown to validate the proposed methodology.





Author: Paolo Pennacchi and Andrea Vania

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents