Nanoindentation Characterization of a Ternary Clay-Based Composite Used in Ancient Chinese ConstructionReport as inadecuate


Nanoindentation Characterization of a Ternary Clay-Based Composite Used in Ancient Chinese Construction


Nanoindentation Characterization of a Ternary Clay-Based Composite Used in Ancient Chinese Construction - Download this document for free, or read online. Document in PDF available to download.

1

State Key Laboratory of Ocean Engineering, Department of Civil Engineering, Shanghai Jiao Tong University, Shanghai 200240, China

2

Department of Civil and Environmental Engineering, University of Massachusetts Amherst, Amherst, MA 01003, USA

3

Department of Civil and Environmental Engineering, Louisiana State University, Baton Rouge, LA 70803, USA

4

College of Ocean Environment and Engineering, Shanghai Maritime University, Shanghai 200135, China





*

Author to whom correspondence should be addressed.



Academic Editor: Biqiong Chen

Abstract Ternary clay-based composite material TCC, composed of lime, clay and sand, and usually modified with sticky rice and other organic compounds as additives, was widely used historically in Chinese construction and buildings due to its high mechanical performance. In this study, to gain an insight into the micromechanical mechanism of this cementitious material, the nanomechanical properties and volume fraction of mechanically different phases of the binder matrix are derived from the analysis of grid nanoindentation tests. Results show that there are five distinct mechanical phases, where the calcium silicate hydrate C-S-H and geopolymer present in the binder matrix are almost identical to those produced in ordinary Portland cement OPC and alkali-activated fly-ash geopolymer materials in nano-mechanical performance. The nano-mechanical behavior of calcite produced by the carbonation of lime in this binder is close to the calcite porous outer part of some sea urchin shells. Compared to OPC, the C-S-H contained in the TCC has a relatively lower ratio of indentation modulus to indentation hardness, implying a relatively lower resistance to material fracture. However, the geopolymer and calcite, at nearly the same volume content as the C-S-H, help to enhance the strength and durability of the TCC by their higher energy resistance capacity or higher strength compared to the C-S-H. Rediscovering of TCC offers a potential way to improve modern concrete’s strength and durability through synergy of multi-binders and the addition of organic materials if TCC can be advanced in terms of its workability and hardening rate. View Full-Text

Keywords: ternary clay-based composite; nanoindentation; C-S-H; geopolymer ternary clay-based composite; nanoindentation; C-S-H; geopolymer





Author: Dongwei Hou 1,2, Guoping Zhang 1,2,* , Rohit Raj Pant 3, Jack S. Shen 1, Mingming Liu 4 and Hao Luo 4

Source: http://mdpi.com/



DOWNLOAD PDF




Related documents