A Wideband Printed Directional Antenna Array with Impedance Regulating LoadReport as inadecuate




A Wideband Printed Directional Antenna Array with Impedance Regulating Load - Download this document for free, or read online. Document in PDF available to download.

International Journal of Antennas and Propagation - Volume 2014 2014, Article ID 830629, 6 pages -

Research Article

School of Information Science and Technology, Heilongjiang University, Harbin 150080, China

School of Electronics and Information Engineering, Harbin Institute of Technology, Harbin 150080, China

Received 12 February 2014; Accepted 16 April 2014; Published 13 May 2014

Academic Editor: Byungje Lee

Copyright © 2014 Chun-Ying Kang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

We proposed a broadband directional antenna array working at mobile communication frequency band, which achieves a relative bandwidth of 50.7%. This binary antenna array is fed by two branches of the balanced microstrip. To enhance the antenna bandwidth, we introduced a section of loading metal strip. The antenna prototype has a lower than −10 dB within the 1.5 GHz to 2.52 GHz frequency band, particularly from 2.01 GHz to 2.50 GHz, the is lower than −15 dB. The gain varies with relatively small variation within the working band, which is 5.4 dBi to 8.7 dBi.





Author: Chun-Ying Kang, Shu Lin, Li-Wen Jing, Yu Tian, Jia-Xin Dong, and Jia Lu

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents