Research on Dynamic Modeling and Application of Kinetic Contact Interface in Machine ToolReport as inadecuate




Research on Dynamic Modeling and Application of Kinetic Contact Interface in Machine Tool - Download this document for free, or read online. Document in PDF available to download.

Shock and Vibration - Volume 2016 2016, Article ID 5658181, 9 pages -

Research Article

School of Reliability and Systems Engineering, Beihang University, Beijing 100191, China

Science and Technology on Reliability and Environmental Engineering Laboratory, Beihang University, Beijing 100191, China

Received 22 July 2016; Accepted 16 October 2016

Academic Editor: A. El Sinawi

Copyright © 2016 Dan Xu and Zhixin Feng. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

A method is presented which is a kind of combining theoretic analysis and experiment to obtain the equivalent dynamic parameters of linear guideway through four steps in detail. From statics analysis, vibration model analysis, dynamic experiment, and parameter identification, the dynamic modeling of linear guideway is synthetically studied. Based on contact mechanics and elastic mechanics, the mathematic vibration model and the expressions of basic mode frequency are deduced. Then, equivalent stiffness and damping of guideway are obtained in virtue of single-freedom-degree mode fitting method. Moreover, the investigation above is applied in a certain gantry-type machining center; and through comparing with simulation model and experiment results, both availability and correctness are validated.





Author: Dan Xu and Zhixin Feng

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents