Adsorption of Carbon Dioxide onto Activated Carbon Prepared from Coconut ShellsReport as inadecuate




Adsorption of Carbon Dioxide onto Activated Carbon Prepared from Coconut Shells - Download this document for free, or read online. Document in PDF available to download.

Journal of Chemistry - Volume 2015 2015, Article ID 106590, 10 pages -

Research Article

Department of Mechanical Engineering, National Pingtung University of Science and Technology, Pingtung 912, Taiwan

Department of Wood Science and Design, National Pingtung University of Science and Technology, Pingtung 912, Taiwan

Received 29 October 2014; Revised 15 January 2015; Accepted 5 February 2015

Academic Editor: Grigorios Itskos

Copyright © 2015 Pei-Hsing Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

This study presents the fabrication of high-quality activated carbon AC from discarded coconut shells. The effects of experimental parameters such as activation temperature and activation time on the basic characteristics of AC, including charcoal yield, ash content, pH value, Brunauer-Emmett-Teller BET specific surface area, total pore volume, and iodine adsorption, are investigated. The results indicate that as the activation temperature and activation time increase, the charcoal yield of the AC decreases. In contrast, iodine adsorption, ash content, pH value, and total pore volume increase with activation temperature. The AC sample activated at 1000°C for 120 min had the highest BET specific surface area and total pore volume and thus the best CO2 adsorption performance. This sample was compared with 30-mesh commercial AC. The results reveal that coconut-based AC has better instantaneous adsorption capabilities.





Author: Pei-Hsing Huang, Hao-Hsiang Cheng, and Sheau-Horng Lin

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents