Study on the Method for Collecting Vibration Signals from Mill Shell Based on Measuring the Fill Level of Ball MillReport as inadecuate




Study on the Method for Collecting Vibration Signals from Mill Shell Based on Measuring the Fill Level of Ball Mill - Download this document for free, or read online. Document in PDF available to download.

Mathematical Problems in EngineeringVolume 2014 2014, Article ID 472315, 10 pages

Research ArticleSchool of Mechanical Engineering, Southeast University, Nanjing 211189, China

Received 17 April 2014; Revised 26 June 2014; Accepted 30 June 2014; Published 15 July 2014

Academic Editor: Qingsong Xu

Copyright © 2014 Peng Huang et al. This is an open access article distributed under the Creative Commons Attribution License, which permits unrestricted use, distribution, and reproduction in any medium, provided the original work is properly cited.

Abstract

At present the method for measuring the fill level which used the vibration signal of mill shell shows its advantage compared with other methods. However, this method is developed late, and the technique for collecting the vibration signal from mill shell is immature. In this paper, a novel method for collecting the vibration data from mill shell is proposed. Firstly, the layout scheme of vibration sensors on mill shell is given by analyzing the axial and circumferential movement of coal powder in roller. And a special data acquisition system is developed, which can acquire vibration data from different axial and circumferential positions on mill shell. Then the sampling frequency is obtained based on impact model and hierarchical model of steel balls. At the same time, the impact region on mill shell caused by steel balls is considered as the collecting region of vibration signals. Experimental result shows that vibration signals collected by the method proposed in this paper present a high sensitivity to the changes on fill level compared with vibration data of mill bearing, which provides a reliable basis for accurate measurement of the fill level.





Author: Peng Huang, Minping Jia, and Binglin Zhong

Source: https://www.hindawi.com/



DOWNLOAD PDF




Related documents